Ghost 2 Immobiliser Installation
Installing the ghost 2 immobiliser is an easy and effective way to secure your vehicle against theft. It is directly connected to the vehicle's CAN data network and is virtually unnoticeable.
Find a reliable source of power as well as a point of grounding. These wires must be protected from electrical shorts.
Protects against theft
The Ghost 2 Immobiliser creates an individual PIN code by using the electronic buttons on your steering wheel or centre console. This makes sure that only you are authorized to start your car. This means that even if thieves are able to copy your keys or hack into your vehicle's security systems, they will not be able to get your vehicle to move. It's also silent and undetectable by anyone who tests it and you can be sure that no one will know that you've added an extra layer to security.
It also helps in preventing theft because it can disable the engine of your car even if the thief manages to gain access. This is achieved by utilising another device, the Shadow, which connects to your car's CAN data system and does not communicate via radio frequency, which makes it difficult for thieves to locate or alter. Additionally, the Shadow can be linked to a tracking/paging system to allow you to monitor your vehicle's movements. Additionally, it has an output which can be used to activate the siren (if authorized) when someone is trying to steal your vehicle.
It is vital to work in a well-lit area when working with wiring to make it easier to identify the correct wires, and to prevent any short circuits or accidental disconnections. Double-checking and testing the connections is essential and also insulation of the wiring to shield it from the elements. It is also recommended to use cable tie-ups to bundle and secure the wires, which will enhance their appearance and reduce the possibility of them getting ripped off during the operation of a vehicle.
It's an excellent idea to mark the CAN H and L wires with pieces tape or labels, as not knowing where they are could lead to a power surge which damages the immobiliser. It is also an excellent idea to test the identified power source and grounding location with an instrument to ensure that they provide a constant 12V supply as well as a solid grounding.
Simple to use
Ghost immobilisers can help keep your vehicle secure from theft. ghost immobiliser cost can be paired up with an iPhone application for simple management and monitoring. The app will also send notifications if your car has been altered. The app can also assist you to locate your vehicle in the event that it is stolen.
The Ghost immobiliser is subtle and does not require any special equipment to operate. It is connected to the CAN system of your vehicle and programmed with an individual PIN code. It is activated by pressing a set of buttons on your dashboard or steering wheel, or by using the WeCar mobile application. The code is required to be entered before the engine will begin, which means thieves won't be able to just turn on your car and leave.
Installing an immobiliser Ghost is a straightforward process. It's important to follow the steps to ensure that the systems of your vehicle are working smoothly. The first step is to disconnect the battery. This will prevent accidental airbag deployment and ensure safety. It is also important to work in an area that is well-lit so that you can avoid mistakes and make precise connections. To ensure a secure, secure connection, it is essential to use only high-quality connectors or proper soldering.
The CAN H wire as well as the CAN L wiring are needed to connect your Ghost immobiliser with your vehicle's wiring. Use a wiring diagram identify these wires. Then, locate the most suitable location to connect them. Label these wires with labels or tape to aid in identifying them when installing.
It's a good idea test your immobiliser after the connections are made to ensure that it is working as intended. You should also test the Transport Mode which disables the Ghost System and allows you to temporarily switch off your security features. This is especially useful in scenarios such as servicing or transportation of vehicles. This feature is particularly beneficial in the event that your vehicle is old and requires the battery to be isolated during servicing.
Low-profile
Ghost immobilisers can be used to prevent theft from vehicles with keyless entry. It works by capturing the signal from your vehicle's original remote, and creating an obstruction that thieves can't breach without the correct PIN code. It's a safe and discreet way to protect your car and is even recommended by insurance companies to lower monthly cost. It's a low-profile and hidden system that can be located within the buttons of your car. It doesn't have LED indicators, making it almost unnoticeable by thieves.
Contrary to other security systems that are available, the Ghost immobiliser is connected to the CAN data network of your vehicle instead of a key fob. This means that thieves will not be able to recognize or disable the device through wire cutting, and it's impervious to tampering. This makes it difficult for thieves to steal your vehicle. It's also an excellent alternative for older cars that don't have a keyless entry system.
The installation of a ghost immobiliser could be handled by professionals or you can do it yourself with the right equipment and materials. You'll need a few basic hand tools, a multimeter for checking electrical values, as well as cable cords or insulation tape to ensure your connections are properly insulated and secure. Before starting the engine, you should disconnect your battery and be sure that all wiring is securely bundled. This will prevent thieves from tampering with it.
If you're not comfortable with installing your own immobiliser it is possible to find a local auto shop to do it for you. They will take care of the entire process, from the initial inspection to the installation. If anything goes wrong, they will offer a warranty. They'll be in a position to answer any questions you might have about the immobiliser and assist you in deciding whether it's the right choice for your vehicle.
The Autowatch Ghost 2 is a smart immobiliser that is integrated directly with your car's ECU. This helps protect against key cloning and hacking attacks that are typical in modern automobiles. It's TASSA verified and offers superior protection against theft and theft, so you can be assured that your vehicle is secure when you drive it.
TASSA verified
The Ghost immobiliser is one of the most effective ways to guard your vehicle from theft. It connects to your vehicle's CAN data network and utilizes it to prevent the engine from starting without a unique PIN code. The system is undetectable by thieves and is a great alternative to an alarm for your car. You can change the PIN code at any time and only you will know the change, ensuring your vehicle's security.
A TASSA certified installer will complete the installation of Ghost Ghost system within a few hours at your home or place of work. You will also receive an emergency card, installation certificates, and owner's manuals. They will also give you an in-depth demonstration of the device, and ensure that you are completely satisfied with the service before they leave.
The Ghost unlike other immobilisers, can connect directly to the CAN data network of your vehicle. This allows it to be installed without cutting wires. It is also silent and therefore difficult to detect by thieves. The system is programmed using a an unique PIN that is changeable and you enter by using the buttons on your dashboard or steering wheel. This prevents anyone else from starting your car even if they possess the key fobs.
Disconnect the battery prior to installing a ghost 2 immobiliser. This will prevent any airbag deployments that happen accidentally or short circuits that may occur during the process. When the battery is removed, you should follow the instructions in the user's manual to connect the immobiliser. It is also recommended to consult online resources for additional guidance specific to your car's model.
You should test the immobiliser after completing it to ensure it's functioning properly. Enter the PIN code into the vehicle and then try to start it. After doing this it is recommended to check regularly to make sure that the immobiliser is functioning correctly. This will help you spot any issues early so you can resolve them quickly.